The switch for the reversing lights
I20
is
supplied when the ignition is switched on (INT) by the line for
fuse
F1
for the junction unit
B1
.
When reverse gear is engaged, the switch
closes and sends the supply to the reversing lights in the centre
rear light cluster on the left
F35
and on the right
F36
,
via the junction unit
B1
(pin 9 connector D and pins 6 and
7 of connector G).
Functional description
Reversing light switch
I20
is not
present.
Pins 8 and 9 of the automatic transmission
solenoids unit
L50
, connector A, are connected to the reverse
gear sensor and send the signals for switching on the reversing
light in the same way as for other versions.