3232823 - 1020D oil seals on crank shaft

La tenuta anteriore dell'albero motore è realizzata mediante paraolio montato sul coperchio anteriore (corpo pompa olio).La tenuta posteriore dell'albero motore è realizzata mediante un anello paraolio integrato nel coperchio posteriore. The crankshaft front seal (1) and rear seal (2) are achieved by oil seals fitted directly on the relevant covers. The seal between rear main journal cap and crankcase is achieved by gaskets or silicone sealant according to the car version. To replace the above gaskets, refer to op.   1020D50  crank shaft rear mount - apply silicone to mating surfaces with crank case sump and flywheel removed and op.   1020D51  crank shaft rear mount - apply silicone to mating surfaces