1088E35 COMBINED SENDER UNIT FOR COOLANT TEMPERATURE GAUGE AND WARNINGLIGHT R R - Alfa - 156 - eLearn

3237638 - 1088E35 combined sender unit for coolant temperature gauge and warninglight r r

) Ensure that the ignition key is in the OFF position, then disconnect the battery negative (-) terminal.

	Name	Connector
-	Battery	A1B

- 1048A34 sleeve(s) from flow meter to air supply capacity case - r + r . - 5530B10 battery - r+r . 1. Disconnect the electrical connection from the combined sender unit for the engine coolant temperature gauge and warning light.

	Name	Connector
-	Coolant temperature sender unit	K35

2. Undo and remove the combined sender unit for the engine coolant temperature gauge and warning light.

Refitting ( Removing

) Fit the combined sender unit for the engine coolant temperature gauge and warning light and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	COOLANT TEMPT- TEMPT. GAUGE SENDING UNIT	M12	(Thermostat side) 1.7 - 2.1

Connect the electrical connections to the combined sender unit for the coolant temperature gauge and overheating warning light. - 5530B10 battery - r+r . - 1048A34 sleeve(s) from flow meter to air supply capacity case - r + r . Connect the negative (-) battery terminal.