3237446 - 1008A44 rear rigid mount - r r

Removing ( Refitting ) Remove the vehicle from the ramp. - 7055B54  under-engine guard - r r - 1076B52  exhaust pipe (one) leaving l/h or r/h exhaust manifold - r + rPosition a hydraulic jack under the engine.1. Undo the bolts (1a) and (1b), then remove the rigid rear support for the power unit (1c). Refitting ( Removing ) 1. Fit the rigid rear support for the power unit (1a) and fix it tightening the bolts (1b) and (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER UNIT RIGID REAR MOUNT	M12	8.8

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	POWER UNIT RIGID REAR MOUNT	M16	10.2 - 12.6

Remove the hydraulic jack from under the engine. - 1076B52  exhaust pipe (one) leaving l/h or r/h exhaust manifold - r + r - 7055B54  under-engine guard - r rRemove the vehicle from the ramp.