1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R - Alfa - 156 - eLearn

3237557 - 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r

) Disconnect the battery negative (-) terminal.

	Name	Connector
-	Battery	A1

1. Loosen the bands fixing the inlet ducts to the air chamber.2. Disconnect the oil vapour recirculation pipe from the air chamber.3. Disconnect the vacuum intake pipe from the air chamber.4. Disconnect the fuel/oil vapour recirculation pipe from the air chamber.5. Undo the bolts (5a) and move the oil vapour separator (5b) aside.

Disconnect the corrugated hose from the throttle body and move aside.1. Disconnect the electrical connection of the throttle body actuator.

	Name	Connector
1	Throttle body actuator	N75

1. Undo the bolts (1a) and remove the air chamber (1b).

Refitting ( Removing

) Fit the air chamber, connect it to the intake ducts and fix it using the bolts.Connect the electrical connection to the throttle body actuator.Replace the corrugated sleeve and connect to the throttle body.Place the oil vapour separator back in its housing and fix it using the bolts.Connect the fuel vapour recirculation pipe to the air chamber.Connect the brake servo vacuum intake pipe to the air chamber.Connect the oil vapour recirculation pipe to the air chamber.Tighten the bands fixing the inlet ducts to the air chamber.Connect the negative (-) battery terminal.