3237598 - 1080E24 fuel vapour by-pass valve/solenoid - r + r

Removing ( Refitting ) Position the vehicle on the lift.Disconnect the battery negative (-) terminal.

	Name	Connector
-	Battery	A1

 - 4450B10  Front WHEEL (one) - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R.1. Disconnect the electrical connection from the fuel vapour cut out valve.

	Name	Connector
1	Fuel vapour recovery solenoid	L10

2. Disconnect the fuel vapour inlet and outlet pipes (2a) and remove the fuel vapour cut out valve (2b) from its housing. Refitting ( Removing ) Place the fuel vapour cut out valve back in its housing.Connect the fuel vapour inlet and outlet pipes to the fuel vapour cut out valve.Connect the electrical connection to the fuel vapour cut out valve. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B10  Front WHEEL (one) - R.R.Connect the negative (-) battery terminal.Remove the vehicle from the ramp.