3237604 - 1080E65 Fuel vapour PIPE from SOLENOID VALVE to AIR INTAKE CHAMBER pipe - R.R.

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the stop OFF, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

Proceed with the removal  - 4450B10  Front WHEEL (one) - R.R. (Right side). Proceed with the removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side). Proceed with the removal  - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. (Right side). 1. Undo bolts (1a) and remove protection (1b). 1. Disconnet the fuel vapour pipe from solenoid to air intake chamber, intermediate connector side.2. Release the fuel vapour pipe from solenoid to air intake chamber pipe from the band.3. Undo the bolts (3a) and move the screen washer fluid reservoir (3b) over to the side. 1. Undo the nuts (1a) securing the activated carbon filter mounting bracket (1b), then lower it as necessary. 1. Disconnect the fuel vapour pipe from solenoid to air intake chamber pipe, solenoid side, and remove. Refitting ( Removing ) Refit the fuel vapour pipe from solenoid to air intake chamber pipe and connect to the solenoid.Refit the activated carbon filter mounting bracket and secure it using the nuts.Refit the screen washer fluid reservoir and secure it using the bolts.Secure the fuel vapour pipe from solenoid to air intake chamber pipe to the band.Connect the fuel vapour pipe from solenoid to air intake chamber pipe, intermediate connector side.Place the protection back in its housing and secure it using the bolt. Proceed with the refitting  - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. (Right side). Proceed with the refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side). Proceed with the refitting  - 4450B10  Front WHEEL (one) - R.R. (Right side). Connect the battery terminal (-).Remove the car from the ramp.