3237518 - 1040A70 submerged pump assembly complete with level guage control - r + r

When scrapping the submerged pump assembly with level gauge mechanism, always empty of fuel as follows:

  • while removing the submerged pump assembly, draw off any fuel in the tank using an in-line pump (electric or manual);
  • fully remove the submerged pump assembly then, working at the bench, connect an in-line pump (electric or manual) to the assembly connector;
  • run the pump for as long enough to collect most of the petrol present inside the filter.
Removing ( Refitting ) Disconnect the battery negative (-) terminal.

NameConnector
-Battery  A1 
 - 7040B10  load platform (luggage platform) trim - r+r - 7050B18  rear seat arm rest - r+r1. Working via the luggage compartment, undo the nuts (1a) and move the protection (1b).
1. Working via the passenger compartment, disconnect the electrical connection (1a) from the immersed pump assembly complete with gauge and remove the protection (1b).

NameConnector
1Fuel pump and sender unit  N40 
2. Disconnect the fuel supply pipe from the immersed pump assembly complete with gauge.
1. Undo the ring nut (1a) fixing the immersed pump assembly complete with gauge using the tool (1b).

NameCountry
1bKey1.822.135.000
Remove the immersed pump assembly complete with gauge.
Refitting ( Removing ) Place the immersed pump assembly complete with gauge back in its housing.Tighten the ring nut fixing the immersed pump assembly complete with gauge using the tool.

NameCountry
-Key1.822.135.000
Connect the fuel supply pipe to the immersed pump assembly complete with gauge.Connect the electrical connection to the immersed pump assembly complete with gauge after having passed it through the protection.Fit the protection and fix it using the nuts. - 7050B18  rear seat arm rest - r+r - 7040B10  load platform (luggage platform) trim - r+rConnect the negative (-) battery terminal

When scrapping the submerged pump assembly with level gauge mechanism, always empty of fuel as follows:

  • while removing the submerged pump assembly, draw off any fuel in the tank using an in-line pump (electric or manual);
  • fully remove the submerged pump assembly then, working at the bench, connect an in-line pump (electric or manual) to the assembly connector;
  • run the pump for as long enough to collect most of the petrol present inside the filter.

For cars fitted with returnless system, when scrapping the submerged pump assembly with level gauge mechanism, always empty of fuel as follows:

  • while removing the submerged pump assembly, draw off any fuel in the tank using an in-line pump (electric or manual);
  • fully remove the submerged pump assembly then, working at the bench, connect an in-line pump (electric or manual) to the assembly connector;
  • run the pump for as long enough to collect most of the petrol present inside the filter.

When scrapping the submerged pump assembly with level gauge mechanism, always empty of fuel as follows:

  • while removing the submerged pump assembly, draw off any fuel in the tank using an in-line pump (electric or manual);
  • fully remove the submerged pump assembly then, working at the bench, connect an in-line pump (electric or manual) to the assembly connector;
  • run the pump for as long enough to collect most of the petrol present inside the filter.