1040B32 FRONT FUEL DELIVERY LINE - R R - Alfa - 156 - eLearn

3237521 - 1040B32 front fuel delivery line - r r

) Position the vehicle on the ramp.Ensure that the ignition key is in the stop position, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

1. Loosen collars (1a) and remove the air intake pipe from the debimeter to the throttle body (1b). Release the pipe from the oil vapour recirculation pipe.

1. Undo the plugs for the fuel manifold and drain the pressure from the fuel system via the valves.

Recover the fuel which comes out in a suitable container.

1. Undo the connector (1a) and disconnect the fuel supply pipe from the manifold (1b).

1. Undo the bolts (1a) and remove the protections (1b) for the fuel outlet pipes and fuel vapour recovery pipes.

Take care to release the pipe retainer clips integral with the rear protection.

2. Disconnect the rapid attachment for the front fuel supply pipe from the rear pipe.3. Release the front fuel supply pipe (3a) from the fixings under the body (3b).

1. Release the front fuel outlet pipe (1a) and fuel vapour recovery pipe (1b) from fastening (1c).

Continue with the removal - 1008C10 power unit upper reaction link r r . 1. Undo nut (1a) and remove wheel rpm sensor electrical connection bracket (1b).

Release the front fuel supply pipe from the remaining fastenings on the engine bulkhead and remove.

Refitting ( Removing

) Place the front fuel supply pipe back in its housing.Remove the wheel rpm sensor electrical connection bracket and secure with a nut. Continue with the refitting - 1008C10 power unit upper reaction link r rSecure the front fuel delivery pipe and the fuel vapour recovery pipe to the fastenings on the engine bulkhead.Fix the front fuel supply pipe to the underbody fixings.Connect the front fuel outlet pipe quick-release fitting to the rear fitting.Refit the protections for the fuel outlet hose and fuel vapour recovery hose and secure with bolts.Connect the fuel supply pipe to the manifold and fix it using the connector.Refit the air inlet pipe from debimeter to throttle body and secure with collars.Connect the battery terminal (-).Remove the car from the ramp.