3237919 - 1820B58 clutch hydraulic circuit vibration damper - r+r

Removing ( Refitting )  - 5530B10  battery - r+r - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.1. Drain the brake-clutch fluid from the reservoir using a suitable syringe. 1. Disconnect the fluid inlet and oulet connectors on the hydraulic clutch circuit vibration damper.2. Undo the bolts (2a) and remove the hydraulic clutch circuit vibration damper. Refitting ( Removing ) Fit the hydraulic clutch circuit vibration damper.and secure by tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	HYDRAULIC CLUTCH VIBRATION DAMPER	M6	0.9 - 1.1

Connect the fluid supply and intake connectors to the vibration damper and tighten to torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	HOSE FROM VIBRATION DAMPER	M12	1.7 - 1.9

 - 1820B08  Clutch release HYDRAULIC SYSTEM - Bleeding air and restoring level - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. - 5530B10  battery - r+r