3238105 - 3340B67 rh brake connection pipe - r r

Removing ( Refitting ) Place the car on the lifting bridge. - 4450B11  WHEEL (one) rear - R.R. - 1076B18  rigid section of exhaust pipe between catalytic converter and silencer - r + r1. Unloose screws (1a) fixing bearing belts (1b) of fuel reservoir .2. Unloose screws (2a) and remove fuel inlet pipe guards (2b). 1. Unloose screws (1a) and disconnect fuel inlet pipe (1b) from body. 1. Remove brake piping underbody clamps.2. Unloose rigid pipe fitting from right rear brake connection pipe. 1. Unloose fitting by brake caliper side, remove right rear brake connection pipe by the back side. Refitting ( Removing ) Mount right rear brake connection pipe.Tighten right rear brake connection pipe fittings to the prescribed couple.

	Fastening	Component	Ø	Value(daNm)
-	Connector	BRAKE SYSTEM FITTINGS	M10	1.3 - 1.5

Mount brake piping underbody clamps.Connect fuel inlet pipe to body and fix it with its screws.Mount fuel inlet pipe guards and fix it with its screws.Tighten bearing belts fixing screws of fuel reservoir. - 1076B18  rigid section of exhaust pipe between catalytic converter and silencer - r + r - 4450B11  WHEEL (one) rear - R.R.Take the car off the lifting bridge.