3238402 - 5510C34 rpm and timing sensor (single) - r+r

Removing ( Refitting )  - 5530B10  battery - r+r - 1076B52  exhaust pipe (one) leaving l/h or r/h exhaust manifold - r + r1. Remove flywheel protection ( 1a) and rpm sensor by unscrewing the three bolts (1b). 1. Unscrew retaining bolts (1a) and remove rpm sensor (1b) from its seat. Then release lead (1c) from the core hitches fastened to the body. 1. Working from inside the engine bay, disconnect the electrical connection and withdraw the rpm sensor.

	Name	Connector
1	Rpm sensor	K46

Refitting ( Removing ) 1. Fit the engine rpm sensor and secure to the crankcase. Use a feeler gauge to check that the gap between sensor and engine flywheel is 0.8 - 1.5mm.

	Name	Country
1	Feeler gauge	1.895.113.000

Connect the electrical connection and secure the electrical lead to the core hitches on the engine.Fit the engine flywheel protection and securing using bolts. - 1076B52  exhaust pipe (one) leaving l/h or r/h exhaust manifold - r + r - 5530B10  battery - r+r