3238423 - 5530A14 alternator - r+r for versions with air conditioner

Removing ( Refitting )  - 7055B54  under-engine guard - r r - 4450B10  Front WHEEL (one) - R.R. - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 1092G10  single engine belt r r - 1076B52  exhaust pipe (one) leaving l/h or r/h exhaust manifold - r + r - 1072C34  r/h exhaust manifold - r + r and replace seal - 1008B20  power unit intermediate mount flexible block - replace - 1084B34  cartridge engine oil filter support - r + r - 1008B10  power unit front mount (timing side) flexible block - replaceLoosen the three alternator mount bolts so the alternator is free to move a little.1. Unscrew nuts (1a) and remove heat shield (1b) from the steering box.
1. Undo the upper alternator nut, raise the engine using the hydraulic jack and withdraw the retaining bolt. Then remove the alternator from its seat.
Remove the alternator mount from the engine crankase.Remove the alternator altogether by withdrawing it through the intermediate engine mounting. Refitting ( Removing ) Refit the alternator mount and tighten the three bolts to torque.

FasteningComponentØValue(daNm)
-BoltALTERNATOR SUPPORTM82.3 - 3.3
Refit the alternator and rotate upwards. Secure in this position using only the upper bolt.Refit the steering box heat shield. - 1008B10  power unit front mount (timing side) flexible block - replace - 1084B34  cartridge engine oil filter support - r + r - 1008B20  power unit intermediate mount flexible block - replace - 1072C34  r/h exhaust manifold - r + r and replace seal - 1076B52  exhaust pipe (one) leaving l/h or r/h exhaust manifold - r + r - 1092G10  single engine belt r r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 4450B10  Front WHEEL (one) - R.R. - 7055B54  under-engine guard - r r