5550D10 BRAKE LIGHT SWITCH - R+R - Alfa - 156 - eLearn

3238487 - 5550D10 brake light switch - r+r

) 1. Disconnect the electrical connection.

	Name	Connector
1	Brake pedal switch	I30

2. Turn IU+2019 switch (2a) anticlockwisely of about 60° and extract it.To make the opening easier operate by a wrench on the exagonal section (2b) of the IU+2019 switch.

Refitting ( Removing

) 1. Prearrange a new switch complete of the bushing (1a) and of the spacer (1b).2. Keep the brake pressed and insert IU+2019 switch in the coupling position on the flask.3. Turn IU+2019 switch anticlockwisely of about 60° until you hear the engagement release of the check tooth (3a) in the IU+2019proper seat (3b).Release the brake pedal until the rest position; pull it ulteriorly towards IU+2019high until Iu+20 switch put itself aumatically as to the bushing. 4. Press the pedal so that you remove the service spacer. The service spacer set an internal stop tooth free which doesn't make happen any ulterior movement between the switch and the brushing.

Test the functionality of the stop lights.