3238614 - 7005M20 front side door electric window system - r r with door panel/support frame removed
Removing
(
Refitting
)
- 7005A04 front side door water
guard protection - r r or replace with door panel removed1. Open the window (1a) about 1/3 of the way, then disconnect the
window safety retainer (1b).2. Open the window about 2/3 of the way, then disconnect it from
the drive pin.3. Manually raise the window to the closed position; fit a support
hook as shown in the figure to prevent accidental lowering of the
window.4. Disconnect the electrical connection of the electric window motor. | Name | Connector |
|---|---|---|
| 4 | Front left electric window motor | N60 |
| Name | Connector |
|---|---|---|
| 4 | Front right electric window motor | N61 |
Refitting
(
Removing
)
Check the condition of the
electrically-operated window and ensure the motor is working properly.Refit the electric window in the door frame,
fixing it using the bolts.Connect the electrical connection for the
electric window motor.Remove the window support hook.Open the window about 2/3 of the way, then
connect it to the drive pin.Open the window about 1/3 of the way, then
connect it to the window safety retainer.Check that the electric window works properly. - 7005A04 front side door water guard protection - r r or replace
with door panel removed