3238766 - 7030B50 sun roof guide , one , lh or rh - r r
Removing ( Refitting ) - 7065C68 rear view mirror - r+r - 7040E40 modular front courtesy light - r r - 7040E16 rear courtesy light - r+r - 7065C34 l/h or r/h sun blind (one) - r+r (right and left side) - 7065C30 interior l/h or r/h grab handle (one) - r+r (all) - 7040H30 front pillar trim - r r (right and left side) - 7040H38 central pillar upper element - r r (right and left side) - 7050A20 one-piece rear seat cushion - r r - 7050B10 l/h or r/h head restraint (one) of rear seat - r+r (right and left side) - 7050A19 rear seat squab - r r - 7040H42 rear pillar trim - r r (right and left side) - 7030B34 sliding roof compartment decorative seal - r+r - 7030B64 sun-roof control switch - r+r - 7040H16 roof panel lining - r r - 7030B10 sliding roof (assembly) - r+r with roof panel removedPlace manually using the pinion engine pin, the trasparent in the open position 1. Loosen the screws2. Remove the trasparent3. Loosen the fixing screws (3a) and clear the engine (3b) from the entrainment hoses 4. Disconnect the pins (4a) of the drainage central (4b).5. Remove the race from the guides6. Loosen the posterior screw7. Remove the seal between the water unloading terminal and the guide8. Remove the water unloading terminal9. Move back the slide so to release the entrainment hose 10. Loosen the slide
Refitting
(
Removing
)
Verify that the slide has
no sign of damage or wear.1. Verify that the entrainment pads of the slide are correctly placed
in their seats2. Place the retainer (2a) in its seat (2b) and in this condition
insert the slide (2c) in the guide (2d).
Insert in the sliding slide
the entrainment hose .Couple the entrainment hose to the slide
Reassemble the water unloading terminalApply the polyurethan seal than level
it in order to allow the water passageTighten the posterior fixing screwInsert the race in the guidesConnect the pins of the drainage race1. Working on both guides, place manually the slides (1a) to the
anterior endrun (1b) (open position).
1. Before reassemble the engine connect it to the electric connection
(1a) and let the cam (1b) turn until its "S" points
corrisponds with the microswitch (1c). The rotation shoul take
place in the clockwise direction passing through the "C"
point.
Assemble the engine and fix
it with the screwAssemble the transparent and fix it with
the screwsPlace manually using the pinion engine
pin, the trasparent in the close position - 7030B10 sliding roof (assembly) - r+r with roof panel removed - 7040H16 roof panel lining - r r - 7030B64 sun-roof control switch - r+r - 7030B34 sliding roof compartment decorative seal - r+r - 7040H42 rear pillar trim - r r
(lato
sinistro e destro)
- 7050A19 rear seat squab - r r - 7050B10 l/h or r/h head restraint (one) of rear seat - r+r
(lato
sinistro e destro)
- 7050A20 one-piece rear seat cushion - r r - 7040H38 central pillar upper element - r r
(lato
sinistro e destro)
- 7040H30 front pillar trim - r r
(right
and left side)
- 7065C30 interior l/h or r/h grab handle (one) - r+r
(all)
- 7065C34 l/h or r/h sun blind (one) - r+r
(right
and left side)
- 7040E16 rear courtesy light - r+r - 7040E40 modular front courtesy light - r r - 7065C68 rear view mirror - r+r