3238880 - 7045A80 front seat cushion squab (outer) joint assembly - r r with seat removed
Removing ( Refitting ) - 7045A25 squab lumbar knob - r r - 7045A24 squab knob - r r - 7045A43 seat exterior guard - r r - 7045A44 seat interior guard - r r - 7045A60 front seat lift device - r r - 7045A86 (One), front SEAT FRAME left or right - R.R.- 7045A84 Front set BACKREST COVER - R.R. with seat removed 1. Undo the bolts fixing the outer joint to the cushion support.2. Recover the inner plate and nuts.3. Undo the rear nuts shown on the cushion support.4. Loosen the front nut shown.5. Disconnect the linkage.
1. Undo the nuts fixing the inner joint to the backrest.2. Release and recover the plate and counter-plate.3. Remove the outer joint (3a) releasing it from the threaded pins
(3b) and from the transmission rod (3c).
Refitting
(
Removing
)
Check that the outer joint
is not damaged.Position the joint and engage it with the
threaded pins and the transmission rod.Position the backrest and fit the counter-plate
and the plate in position.Tighten the nuts fixing the outer joint
to the backrest.Connect the linkage.Tighten the nuts fixing the cushion support.Position the inner plate and tighten the
bolts fixing the joint.Check that the backrest angle adjustment
mechanism is working properly.- 7045A84 Front set BACKREST COVER - R.R. with seat removed - 7045A86 (One), front SEAT FRAME left or right - R.R. - 7045A60 front seat lift device - r r - 7045A44 seat interior guard - r r - 7045A43 seat exterior guard - r r - 7045A24 squab knob - r r - 7045A25 squab lumbar knob - r r