3239138 - 1056BM Check operation of accelerator pedal potentiometer

The operational check should be carried out for three accelerator pedal potentiometer positions.
P, 0° (idle) P1, 0° - 70° (operating range) P2, 88° (internal mechanical stop) Make sure that the ignition is in the OFF position, then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ). Disconnect the electrical connection from the accelerator pedal potentiometer.

NameConnector
-Accelerator pedal potentiometer  K55 
Check that the voltage ratio measured between pins 1-3 and 2-3 and between pins 4-6 and 5-6, in the three angular positions 80°, 70°, 0°, is 0.813 ± 0.04, 0.660 ± 0.04, 0.080 ± 0.01, respectively.