1820B47 RIGID PIPE FROM MASTER CYLINDER (PUMP) TO VIBRATION DAMPER - R R FOR RIGHT HAND DRIVE VERSIONS - Alfa - 156 - eLearn

3237902 - 1820B47 rigid pipe from master cylinder (pump) to vibration damper - r r for right hand drive versions

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

- 1008C10 power unit upper reaction link r r - 1820B43 RIGID PIPE from clutch reservoir to (pump) - master cylinder R.R. for right hand drive versions - 3330C38 FLEXIBLE PIPE - FRONT section - from brake fluid RESERVOIR to (pump) - MASTER CYLINDER R.R. for right hand drive versions - 3330C39 FLEXIBLE PIPE - REAR section - from brake fluid RESERVOIR to (pump) - MASTER CYLINDER R.R. on right hand drive versions - 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. - 1048A28 vacuum air circuit resonator pipe - r+r - 1048A48 throttle heater sleeve - r r1. Loosen the band (1a) from the rigid pipe from the master cylinder to vibration damper (1b), master cylinder side.

1. Release the rigid pipe from master cylinder to vibration damper from the retaining band.2. Undo the connector and disconnect the rigid pipe from master cylinder to vibration damper, damper inlet pipe side.3. Remove the rigid pipe from the master cylinder to the vibration damper.

Refitting ( Removing

) Refit in its seating the rigid pipe from master cylinder to vibration damper.Connect the rigid pipe from the master cylinder to the vibration damper, rigid pipe side, and tighten the fitting to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	RIGID DELIVERY PIPE FROM MASTER CYLINDER	M12 x 1	(Vibration damper inlet pipe side) 1.8

Connect the rigid pipe from the master cylinder to the vibration damper, master cylinder side.

	Fastening	Component	Ø	Value(daNm)
-	Connector	RIGID DELIVERY PIPE FROM MASTER CYLINDER	M12 x 1	(Master cylinder side) 1.8

- 1048A48 throttle heater sleeve - r r - 1048A28 vacuum air circuit resonator pipe - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. - 5530B10 battery - r+r - 3330C39 FLEXIBLE PIPE - REAR section - from brake fluid RESERVOIR to (pump) - MASTER CYLINDER R.R. on right hand drive versions - 3330C38 FLEXIBLE PIPE - FRONT section - from brake fluid RESERVOIR to (pump) - MASTER CYLINDER R.R. for right hand drive versions - 1820B43 RIGID PIPE from clutch reservoir to (pump) - master cylinder R.R. for right hand drive versions - 1008C10 power unit upper reaction link r r- 0010T64 brake and or clutch fluid check level and top up as necessary - 0010T65 hydraulic brake system bleed air - 0010T67 hydraulic clutch system bleed airConnect the negative (-) battery terminal.