3310A48 FRONT BRAKE DISC - R R - Alfa - 156 - eLearn

3238034 - 3310A48 front brake disc - r r

) - 4450B10 Front WHEEL (one) - R.R. - 3310A57 front brake calliper bracket - r r1. Unscrew the pin (1a) and remove the front brake disc (1b).

Refitting ( Removing

) Fit the front brake disc and tighten the bolt to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Pin	FRONT BRAKE DISC.	M8	0.8 - 1.3

- 3310A57 front brake calliper bracket - r r - 4450B10 Front WHEEL (one) - R.R.

Removing ( Refitting

) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1

Proceed with removal - 4450B10 Front WHEEL (one) - R.R. . Proceed with removal - 3310A30 FRONT BRAKE CALIPER (one) - R.R. . 1. Unscrew the pin (1a) and remove the front brake disc (1b).

Refitting ( Removing

) 1. Refit the front brake disc (1a) in its seating and tighten its bolt (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Pin	FRONT BRAKE DISC.	M8	(Wheel hub side) 1.0 ÷ 1.4

Proceed with refitting - 3310A30 FRONT BRAKE CALIPER (one) - R.R. . Top up the brake-clutch fluid level - 0010T64 brake and or clutch fluid check level and top up as necessary . Bleed the air from the hydraulic braking system - 0010T65 hydraulic brake system bleed air . Proceed with refitting - 4450B10 Front WHEEL (one) - R.R. . Connect the negative (-) battery terminal.Remove the car from the ramps.