3238039 - 3010A59 front brake disc guard - r r
Removing
(
Refitting
)
- 4450C10 front pillar (one),
l/h or r/h complete with wheel hub - r+r with wheel removed - check
wheel geometry separately1. Undo the bolts (1a) and remove the front brake disc shield (1b)
from the front vertical link.
Refitting
(
Removing
)
Fit the front brake disc shield
on the vertical link and secure it with its bolts. - 4450C10 front pillar (one), l/h or r/h complete with wheel
hub - r+r with wheel removed - check wheel geometry separately
Removing
(
Refitting
)
Position the vehicle on the ramp.Ensure that the ignition key is in OFF
position, then disconnect the battery negative terminal (-). | Name | Connector |
|---|---|---|
| - | Battery | A1 |
Refitting
(
Removing
)
Place the front brake disc shield back
in its housing and fix it using the bolts.
Proceed with refitting
- 3310A48 front brake disc - r
r
.
Proceed with refitting
- 3310A30 FRONT BRAKE CALIPER
(one) - R.R.
.
Top up the brake-clutch fluid level
- 0010T64 brake and or clutch fluid check level and top up
as necessary
.
Bleed the air from the hydraulic braking
system
- 0010T65 hydraulic brake system bleed air
.
Proceed with refitting
- 4450B10 Front WHEEL (one) -
R.R.
.
Connect the negative (-) battery terminal.Remove the car from the ramps.