4130B82 RETURN PIPE BETWEEN RIGID INTERMEDIATE RETURN PIPE TO FLUID RESEVIOR R R - Alfa - 156 - eLearn

3238153 - 4130B82 return pipe between rigid intermediate return pipe to fluid resevior r r

) 1. Loosen the band and disconnect the right cylinder head oil vapour recirculation pipe from the hose between the resonator and the throttle casing.2. Loosen the bands and remove the hose between resonator and throttle body.

Proceed with removal - 5530B10 battery - r+r . Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Drain the power steering fluid from the reservoir using a suitable syringe.1. Loosen the bands and remove the rubber pipe from the rigid return pipe to the fluid reservoir.

Refitting ( Removing

) Place the rubber hose from the rigid return pipe to the fluid reservoir back in its housing and tighten the bands. Proceed with refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Proceed with refitting - 5530B10 battery - r+r . Place the hose between the resonator and the throttle casing back in its housing and tighten the bands.Connect the right cylinder head oil vapour recirculation pipe to the hose between the resonator and the throttle casing and tighten the band.Fill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid [l]	HYDRAULIC POWER ASSISTED STEERING SYSTEM	TUTELA GI/A	1.2

Fluid for Northern European countries: TUTELA CAR GI/E - ATF DEXRON III.

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times. Check and, if necessary, top up the fluid level in the reservoir. Start the engine and carry out 4 - 5 full steering wheel turn cycles (right and left). Top up the fluid level in the reservoir.