4130B98 POWER ASSISTED STEERING FLUID COOLING RADIATOR - R.R. - Alfa - 156 - eLearn

3238155 - 4130B98 Power assisted steering fluid cooling RADIATOR - R.R.

) Position the vehicle on the ramp Proceed with removal - 7055B54 under-engine guard - r r . 1. Disconnect the rapid connectors for the inlet and outlet pipes from the power assisted steering fluid cooling radiator.

Collect the power assisted steering fluid that comes out in a suitable container.

1. Undo the bolt (1a) and the nuts (1b) and remove the power assisted steering fluid cooling radiator (1c).

Refitting ( Removing

) Place the power assisted steering fluid radiator in its housing and secure it using the nuts and the bolt.Connect the rapid connectors for the inlet and outlet pipes to the power assisted steering fluid radiator. Proceed with refitting - 7055B54 under-engine guard - r r . Fill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid [l]	HYDRAULIC POWER ASSISTED STEERING SYSTEM	TUTELA GI/A	1.2

Fluid for Northern European countries: TUTELA CAR GI/E - ATF DEXRON III.

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times. Check and, if necessary, top up the fluid level in the reservoir. Remove the car from the ramps.Start the engine and carry out 4 - 5 full steering wheel turn cycles (right and left). Top up the fluid level in the reservoir.