3239081 - 1036E20 timing shaft of one cylinder head, lh or rh - r r with cylinder head removed

Removing ( Refitting ) 1. Position the cylinder head (1a) in the vice, using tools (1b), 1 (c) and 1(d).

NameCountry
1bMount1.820.012.000

NameCountry
1cMount1.820.050.000

NameCountry
1d-1.860.952.000
1. Undo the nuts (1a) and remove the bracket on the engine for the reaction rod (1b).
1. Undo the bolts (1a) and remove the camshaft caps (1b).2. Remove the camshafts.3. Remove the front camshaft oil seals.
Refitting ( Removing ) Place the camshafts back in their housings.Place the camshaft caps back in their housings in the sequence shown in the diagram.
Tighten the camshaft cap bolts to the specified torque.

FasteningComponentØValue(daNm)
-BoltCAMSHAFT CAPS/M8(Cylinder head side) 1.8 ÷ 2.0
1. Fit the camshaft front oil seals (1a) using the tool (1b).

NameCountry
1bFitting tool1.860.948.000
1. Fit the bracket on the engine for the reaction rod (1a) and fix it tightening the nuts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bNutREACTION LINK BRACKET ON ENGINEM10(Cylinder head side) 4.5 ÷ 5.5
Remove the cylinder head from the support tools.