3237611 - 1084A42 engine oil temperature sender unit - r + r

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

	Name	Connector
-	Battery	A1B

Proceed with removal  - 7055B54  under-engine guard - r r . 1. Disconnect the electrical connection from the engine oil temperature sender unit.

	Name	Connector
1	Engine oil temperature sensor	K29

2. Undo and remove the engine oil temperature sender unit.

Recover the engine oil which comes out in a suitable container.

Refitting ( Removing ) Place the engine oil temperature sender unit in its seating and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Connect the electrical connection to the engine oil temperature sender unit. Proceed with refitting  - 7055B54  under-engine guard - r r . Connect the negative (-) battery terminal.Remove the car from the ramps.