3238068 - 3330C30 brake fluid reservoir - r + r and wash inside

Removing ( Refitting ) Disconnect the battery negative (-) terminal.

NameConnector
-Battery  A1 
1. Drain the brake fluid from the reservoir using a suitable syringe.
1. Remove the engine bulkhead seal.2. Disconnect the electrical connection from the brake fluid level sensor.

NameConnector
-Brake fluid level sensor (switch)  K25 
3. Undo the bolts securing the brake fluid reservoir to the engine bulkhead.4. Raise the brake fluid reservoir as much as necessary to disconnect the relevant pipes.5. Remove the brake fluid reservoir.
Refitting ( Removing ) Wash the inside of the brake fluid reservoir.Refit the brake fluid reservoir in its seating and connect the relevant pipes.Fix the brake fluid reservoir to the engine bulkhead using the bolts.Connect the electrical connection to the brake fluid level sensor.

NameConnector
-Brake fluid level sensor (switch)  K25 
Place the engine bulkhead seal back in its seating.Connect the negative (-) battery terminal.

NameConnector
-Battery  A1 
 - 3330A10  BRAKE FLUID - Check level and top up, if necessary.