4130B10 POWER STEERING FLUID RESEVOIR R R - Alfa - 156 - eLearn

3238132 - 4130B10 power steering fluid resevoir r r

) Drain the power steering fluid from the reservoir using a suitable syringe.1. Undo the bolts and move the power assisted steering fluid reservoir away from the engine bulkhead.2. Disconnect fluid inlet and outlet pipe from the power steering fluid reservoir (2a) then remove the reservoir (2b).

Refitting ( Removing

) Connect the fluid inlet and outlet pipes to the power assisted steering reservoir.Place the power assisted steering fluid reservoir back in its housing and fix it using the bolts to the bonnet bulkhead.Fill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid	POWER ASSISTED STEERING CIRCUIT	TUTELA GI/A	-

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times. Check and, if necessary, top up the fluid level in the reservoir. Position the vehicle on the ground and start up the engine.Carry out 4 - 5 complete steering wheel rotation cycles (right and left).Top up the fluid level in the reservoir.