3238178 - 4410A12 front suspension damper (one), lh or rh - for mcpherson strut system - includes dismantling/re-building of assembly at bench r r

Removing ( Refitting )  - 4410A80  damper lower fork - r r - 4450B10  Front WHEEL (one) - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4410A10  l/h or r/h front suspension spring/damper unit (one) - r+r - check wheel geometry separately if necessary1. Fit the flanges (1a) on the tool (1b).

	Name	Country
1a	Flanges	1.870.662.000

	Name	Country
1b	Mount	1.820.089.000

1. Fit the shock absorber-spring assembly on the support tool and compress it. 1. Undo the nut (1a) for the upper shock absorber buffer using tools (1b) and (1c).

	Name	Country
1b	Key	1.870.663.000

	Name	Country
1c	Counter-torque	1.870.664.000

1. Loosen the compression tool and remove spring (1a), shock absorber (1b), upper plate (1c), and upper buffer (1d). Refitting ( Removing ) 1. Assemble the components of the shock absorber-spring assembly using the tool for centring the shock absorber strut.

	Name	Country
1	Flanges	1.870.662.000

1. Tighten the nut (1a) for the shock absorber upper buffer to the recommended torque using tools (1b) and (1c).

	Fastening	Component	Ø	Value(daNm)
1a	Nut	FRONT DAMPER TOP ATTACHMENT	M10	3.1 - 3.5

	Name	Country
1b	Key	1.870.663.000

	Name	Country
1c	Counter-torque	1.870.664.000

Loosen the support tool and remove the shock absorber-spring assembly.Reposition the tool used for dismantling-reassembling the shock absorber-spring assembly. - 4410A10  l/h or r/h front suspension spring/damper unit (one) - r+r - check wheel geometry separately if necessary - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B10  Front WHEEL (one) - R.R. - 4410A80  damper lower fork - r r Check and if necessary check the wheel geometry values  - 4450A10  front wheel geometry - check using optical equipment - includes front wheel tow-in adjustment if necessary .