4410A80 DAMPER LOWER FORK - R R - Alfa - 156 - eLearn

3238181 - 4410A80 damper lower fork - r r

) Position the vehicle on the ramp. - 4450B10 Front WHEEL (one) - R.R. - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.1. Unscrew nut (1a) securing the anti-roll bar joint to the lower fork and the bracket (1b) supporting ABS active sensor wiring (1c). 2. Undo the nut (2a) and disconnect the power steering box rod from the steering knuckle using the tool (2b).

	Name	Country
2b	Extractor	1.821.169.000

1. Disconnect the brake pipes from the support plate.2. Undo the bolt securing the front suspension lower damper connection fork to the lower wishbone.3. Remove the brake pipe mounting plate.

1. Undo nut (1a) and disconnect upper wishbone (1b) from the wheel strut using tool (1c).

	Name	Country
1c	Extractor	1.821.169.000

1. Undo bolt (1a) and remove the lower fork connecting the front suspension damper to lower wishbone (1b).

Refitting ( Removing

) Refit the lower fork in its seating and secure it to the lower wishbone, tightening the bolt to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT DAMPER FORK ON WISHBONE	M12	(Lower track control arm side) 10.8 ÷ 13.2

Connect the upper wishbone to the wheel strut and secure by tightening the nut to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT SUSPENSION TOP LEVER	M10	4.3 - 4.7

Refit in its seating the brake pipe mounting bracket, then tighten the bolt on securing the lower fork to the shock absorber to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT DAMPER FORK ON WISHBONE	M12	8.1 - 8.9

Connect the brake pipe to the mounting bracket.Connect the power steering box rod to the steering knuckle and secure it tightening the nut to torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	ADJUSTABLE STEERING LINKS	M14	2.9 - 3.6

Refit the ABS active sensor wiring bracket, then tighten the nut securing the joint between the anti-roll bar and lower fork to torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT ANTI-ROLL BAR JOINTS	M10	3.8 - 4.7

- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B10 Front WHEEL (one) - R.R.Remove the car from the ramp. Check and if necessary adjust the wheel geometry values - 4450A10 front wheel geometry - check using optical equipment - includes front wheel tow-in adjustment if necessary .