3238270 - 5010D30 passenger compartment air temperature sensor - r+r following electrical wiring check operation

Removing ( Refitting )  - 5040D22  control (one) of air conditioner control support - arrange - 7065C42  ashtray (one) r+r - 5570T80  car radio unit - r+r - 2125C24  gear lever knob - r + r - 7040A60  under facia trim - r+r1. Unscrew the bolts2. Release the passenger compartment temperature sensor. 1. Rotate the control unit (1a) so that the cable retaining band (1b) for the passenger compartment temperature sensor can be cut.2. Disconnect the electrical connection and extract the passenger compartment temperature sensor.

	Name	Connector
2	Passenger compartment air sensor	K89

Refitting ( Removing ) Check that the sensor is not damaged and, if necessary check the electrical properties. Check the resistance between 3 and 4.

	Measurement		Value
-	Resistance at 25øC (KOhm)		10

Connect pin 1 to 12V and in 2 to earth and check that the inner motor is working properlyConnect the electrical connection for the passenger compartment temperature sensor.Fit the cable retaining band.Fit the passenger compartment temperature sensorTighten the screws. - 7040A60  under facia trim - r+r - 2125C24  gear lever knob - r + r - 5570T80  car radio unit - r+r - 7065C42  ashtray (one) r+r - 5040D22  control (one) of air conditioner control support - arrangeCheck the operation of the system using the Examiner or the other diagnostic equipment.