3238445 - 5540B16 FRONT LIGHT CLUSTER with direction indicator (one), left or right - R.R.

Removing ( Refitting )  - 7055A43  central front grille - r r - 7055A41  RIGHT FRONT GRILLE - R.R. (left and right) It is advisable to place the vehicle on a lift.1. Undo the bolts fixing the end of the front bumper.2. Release the wheel arch liner from the front bumper using the special tool in the area where the bolts were removed.

	Name	Country
2	Scraper blade	1.823.014.000

3. Working from the bottom, undo the two bolts securing the bumper to the wing. 1. Undo the centre bolts fastening the bumper.2. Move the bumper slightly and support it appropriately. 1. Undo the three nuts fastening the headlamp.2. Move the headlamp and disconnect the electrical connections (2a, 2b, 2c).

	Name	Connector
2a	Left headlamp	F10A

	Name	Connector
2b	Left headlamp	F10B

	Name	Connector
2b	Right headlamp	F11A

	Name	Connector
2b	Right headlamp	F11B

	Name	Connector
2c	Left headlamp alignment corrector motor	N30

	Name	Connector
2c	Right headlamp alignment corrector motor	N31

Refitting ( Removing ) Check that the lamp is not damaged.Connect the electrical connections and refit the lamp.Tighten the three headlamp fixing nuts.Reposition the side part of the bumper.Tighten the centre bolts fastening the bumper.Working from the bottom, tighten the two bolts securing the bumper to the wing.Fit the wheel arch liner on the front bumper.Tighten the bolts securing the ends of the front bumper. - 7055A41  RIGHT FRONT GRILLE - R.R. (left and right)  - 7055A43  central front grille - r r Removing ( Refitting )  - 7055A43  central front grille - r r .  - 7055A41  RIGHT FRONT GRILLE - R.R. (right and left).

It is advisable to place the vehicle on a lift.

1. Undo the bolts fixing the end of the front bumper.2. Release the wheel arch liner from the front bumper using the special tool in the area where the bolts were removed.

	Name	Country
1	Scraper blade	1.823.014.000

3. Working from the bottom, undo the two bolts securing the bumper to the wing. 1. Undo the bumper's central bolts.2. Move the bumper slightly and support it appropriately. 1. Undo the two nuts (1a) securing the light cluster and release the bolt from the retainer (1b).2. Move the light cluster and disconnect the electrical connections (2a, 2b, 2c).

	Name	Connector
2a	Left headlamp	F10A

	Name	Connector
2b	Left headlamp	F10B

	Name	Connector
2c	Left headlamp alignment corrector motor	N30

	Name	Connector
2a	Right headlamp	F11A

	Name	Connector
2b	Right headlamp	F11B

	Name	Connector
2c	Right headlamp alignment corrector motor	N31

Refitting ( Removing ) Check that the light cluster is not damaged.Connect the electrical connections and refit the light cluster.Tighten the two nuts fastening the light cluster and attach the bolt on the retainer.Reposition the side part of the bumper.Tighten the bumper's central bolts.Working from the bottom, tighten the two bolts securing the bumper to the wing.Fit the wheel arch liner on the front bumper.Tighten the bolts securing the ends of the front bumper. - 7055A41  RIGHT FRONT GRILLE - R.R. (left and right)  - 7055A43  central front grille - r r - 5540B38  headlamp/light cluster light beam - position