3239025 - 7210A30 R.R. FRONT WING MOUNTING BRACKET
Removing ( Refitting ) Check if any of the connected parts are deformed by checking body alignment dimensions. Use appropriate measurement tools (reference rigs, templates or gauges).If necessary, straighten the body before removing the part.
1. Undo the bolts shown in the figure.2. Remove the side bracket from the car.
Refitting
(
Removing
)
1. Provisionally fit the side bracket to the car.2. Position front wing (2a) and front bumper (2b), lower bonnet
lid (2c).Check alignment and ensure the surrounding
gap is even.Remove the components fitted previously.
Paint the front bracket (use
the specified cycle).1. Apply wax.