3239054 - 7210E54 boot

Removing ( Refitting ) 1. Open the boot lid and, using the special tool, remove the rear retaining buttons from the top trim.

	Name	Country
1	Scraper blade	1.823.015.000

2. Lower the top trim (2a), disconnect the electrical connection (2b) and withdraw it.

	Name	Connector
2b	Boot / rear coupling	D40

1. Withdraw the wiring sleeve from both ends.2. Withdraw the wiring.Support the boot lid with the assistance of a second operator.3. Undo the bolts from both sides of the boot lid.4. Remove the boot lid. Refitting ( Removing ) Check that the boot lid and hinges are undamaged.Fit the boot lid.Tighten the hinge bolts without tightening them.Insert the wiring and fit the wiring sleeve.Connect the electrical connection and fit it in its seating.Fit the rear retaining buttons on the top trim. - 7025B10  boot lid - square