3239069 - 1016E21 l cylinder head - overhaul

1. Undo the bolts (1a) and remove the power assisted steering pump (1b).2. Undo bolts (2a) and remove power steering pump mounting (2b). Follow the same instructions as for the right cylinder head, taking into account that the following are not fitted on the left cylinder head: the bracket on the engine for the reaction rod and the timing belt moving tensioner. Follow the same instructions as for the right cylinder head, taking into account that the following are not fitted on the left cylinder head: the bracket on the engine for the reaction rod and the timing belt moving tensioner. 1. Place the power assisted steering pump mounting (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER STEERING PUMP SUPPORT/BRACKET	M8	(Cylinder head side) 2.3 ÷ 2.8

2. Place the power assisted steering pump (2a) back in its housing and secure it by tightening the bolts (2b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2b	Bolt	POWER STEERING PUMP	M8	(Support side) 2.3 ÷ 2.8