3239231 - Introduction - MANOEUVRING AND WARNING SIGNALS

STEERING WHEEL STALK UNIT

There are two levers on the steering column switch unit which control the following functions:

• side lights
• dipped beams
• main beam headlamps
• turn signals
• windscreen wiper
• windscreen washer
• headlamp washers

Interior diagram

Refer to the illustration.

Front view

Refer to the illustration.

Rear view

Refer to the illustration.

Stalk unit pin-out

9-way connector A1 N.C.2 Windscreen wiper, high speed3 Moderate speed wiper4 Low speed wiper5 Wiper intermittence output6, Headlamp washer control7 Earth8, Windscreen washer pump9, Windscreen washer pump7-way connector B1 Main beans2 Dipped beams3 N.C.4, Supply controlled by the ignition (INT/A)5 N.C.6, Side lights supply7, Supply controlled by the ignition (INT)6-way connector C1 Left-hand turn signal2, Hazard warning lights control3, Right direction indicator4 N.C.5 N.C.6 N.C.7-way connector D1 N.C.2 N.C.3, Windscreen wiper supply4 N.C.5, Horns6 N.C.7, Hazard warning lights direct supply For a description of associated linkages and control systems, see WIRING DIAGRAMS for the relevant electrical functions