The supply for the rev counter module
E15
reaches
pins 10 and 16 of connector A directly from the battery. (maxifuse
J/B2
of
B99
, via fuses
F2
and
F3
of junction unit
B1
;
this supply is used by the external lights check device (
See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
,
See E2021 BRAKE LIGHTS
,
See E2031 REAR FOG LAMPS
).
The rev counter module
E15
also receives
a supply controlled by the ignition (INT) at pin 15 of connector
B from the line protected by fuse
F4
of the additional fuse
box
B98B
. Pin 14 of connector B is earthed.
The engine rpm signal, which is different
for each engine type, comes from the engine management control unit
M10
to
pin 6 of connector B.
Insufficient engine oil pressure is signalled
at pin 5 of connector B of module
E15
by the earth signal
coming from sensor
K30
.
In particular, for versions with automatic
transmission, the connecting line - pin 12 of connector B of module
E15
-
to the gearbox management control unit
M55
is used for the
instrument's gear indicator display and the "automatic transmission
fault" warning light.
For all the other warning lights, refer
to the diagrams relating to the components to which they refer.