3237449 - 1008B10 power unit front mount (timing side) flexible block - replace
Removing
(
Refitting
)
Position the vehicle on the ramp. - 4450B10 Front WHEEL (one) - R.R. - 7055B64 Engine compartment DUST shield in front wheel arch
(one), left or right - R.R. - 7055B54 under-engine guard - r rPosition a hydraulic jack under the engine.1. Undo the nut (1a) and the bolts (1b), then removge the flexible
mounting for the power unit front support (1c), slightly lowering
the hydraulic jack.
Refitting
(
Removing
)
1. Fit the flexible mounting for the power unit front support (1a)
and fix it tightening the bolts (1b) and the nut (1c) to the recommended
torque after having slightly raised the hydraulic jack. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Bolt | FRONT RUBBER MOUNTS | M8 | 3.1 - 3.8 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1c | Nut | ENGINE MOUNT TIMING SIDE | M10 | 4.2 - 5.1 |
