3237474 - 1020D18 front crank shaft cover oil seal - replace

Removing ( Refitting )  - 4450B10  Front WHEEL (one) - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 1092G10  single engine belt r r - 1032D12  timing system protective cover(s) - r + r - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner1. Remove the toothed drive pulley.Remove the key using a flat drift.2. Remove the oil seal from the crankshaft front cover. Refitting ( Removing ) 1. Fit a new oil seal (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.949.000

Fit the key.Fit the toothed drive pulley. Carry out op.   1016A42  left hand cylinder head ignition coil cover - r+r Carry out op.   1072B50  sleeves connecting air capacity box to inlet manifold is - r+r Carry out op.   5510C14  ignition coil/s - r+r Carry out op.   1016A36  left hand and right hand cam cover - r+r - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1016A36  left hand and right hand cam cover - r+r - 5510C14  ignition coil/s - r+r - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r - 1016A42  left hand cylinder head ignition coil cover - r+r - 1032D12  timing system protective cover(s) - r + r - 1092G10  single engine belt r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B10  Front WHEEL (one) - R.R.  - 1092E10  counter-rotating shaft drive toothed belt - r + r - 1092E20  counter-rotating shaft drive toothed belts drive pulley - r + r with toothed belt removed  - 1092E20  counter-rotating shaft drive toothed belts drive pulley - r + r with toothed belt removed - 1092E10  counter-rotating shaft drive toothed belt - r + r