1080E62 PIPE FROM FUEL VAPOUR SEPARATOR TO SOLENOID - R R - Alfa - 156 - eLearn

3237603 - 1080E62 pipe from fuel vapour separator to solenoid - r r

) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

Proceed with the removal - 4450B10 Front WHEEL (one) - R.R. (Right side). Proceed with the removal - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side). Proceed with the removal - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (Right side). 1. Undo the nuts (1a) fixing the active charcoal filter mounting bracket (1b) to the bodyshell, then lower it as necessary.

1. Disconnect and remove the pipe from the active charcoal filter to the solenoid valve.

Refitting ( Removing

) Place the pipe from the active charcoal filter to the solenoid valve back in its housing and fasten it using the bands.Place the active charcoal filter mounting bracket in its housing and secure it to the bodyshell using the nuts. Proceed with the refitting - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (Right side). Proceed with the refitting - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side). Proceed with the refitting - 4450B10 Front WHEEL (one) - R.R. (Right side). Remove the car from the ramp.