3238151 - 4130B79 COOLING RADIATOR power assisted steering fluid OUTLET PIPE - R.R.

Removing ( Refitting ) Position the vehicle on the ramp Proceed with removal  - 7055B54  under-engine guard - r r . 1. Disconnect the rapid connector for the cooling radiator power assisted steering fluid outlet pipe, radiator side.
Collect the power assisted steering fluid in a suitable container.
2. Loosen the band, disconnect the cooling radiator power assisted steering fluid outlet pipe, rigid pipe side, and remove it.
Refitting ( Removing ) Place the cooling radiator power assisted steering fluid outlet pipe back in its housing, connect it to the rigid pipe and tighten the band.Connect the rapid connector for the cooling radiator power assisted steering fluid outlet pipe, radiator side. Proceed with refitting  - 7055B54  under-engine guard - r r . Fill the power steering circuit with the recommended fluid.

TypeComponentNameQty.
-Fluid [l]HYDRAULIC POWER ASSISTED STEERING SYSTEMTUTELA GI/A1.2
Fluid for Northern European countries: TUTELA CAR GI/E - ATF DEXRON III.
Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times. Check and, if necessary, top up the fluid level in the reservoir. Remove the car from the ramps.Start the engine and carry out 4 - 5 full steering wheel turn cycles (right and left). Top up the fluid level in the reservoir.