3238184 - 4410B40 lower wishbone (with balljoint) of left or right front suspension (one) - r+r -check wheel geometry separately

Removing ( Refitting )  - 4450C10  front pillar (one), l/h or r/h complete with wheel hub - r+r with wheel removed - check wheel geometry separately1. Unscrew the nut of the stabilizing bar articulated joint to the lower fork.2. Remove the active sensor A.B.S. wiring supporting bracket3. Unscrew the bolt (3a) and remove the lower fork which joins the shock absorber of the front suspension to the lower moving arm (3b). 1. Unscrew the screws of the stabilizing bar from the front suspension sleeper (side of moving arm removal).Loosen the screws of the stabilizing bar to the front suspension sleeper (opposite side to that of moving arm removal).2. Unscrew the screws (2a) and remove the lower moving arm of the front suspension (2b). Refitting ( Removing ) Replace into its own place the lower moving arm of the front suspension and secure it with its proper screws to the torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT SUSPENSION LOWER LEVER	M10	6.2 - 6.8

Tighten the screws of the stabilizing bar to the front suspension sleeper to the torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT ANTI-ROLL BAR	M8	2.6 - 3.2

Replace into its own place the lower fork which joins the shock absorber of the front suspension to the lower moving arm and secure it with its proper bolt to the torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT DAMPER FORK ON WISHBONE	M12	8.1 - 8.9

Replace into its own place the active sensor A.B.S. wiring supporting bracketTighten the nut of the stabilizing bar articulated joint to the lower fork to the torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT ANTI-ROLL BAR JOINTS	M10	3.8 - 4.7

 - 4450C10  front pillar (one), l/h or r/h complete with wheel hub - r+r with wheel removed - check wheel geometry separately