3238391 - 5505A10 front beam wiring - r r
To precisely find electric connections see "Wiring diagrams" Section. |
Refitting
(
Removing
)
Check harness is not damaged
and each conductor is properly anchored to connections.Check connections have secondary locks.If necessary, carry out proper continuity
tests.Position front cross brace harness.Block it with stop clamps.Connect right lamp electric connections.Lift the car and connect multilevel pressure
switch electric connection.Place dehydrator filter in its seat and
fix it with fixing clamp, then lower the car.Connect mass terminal.Connect heater fan - radiator group electric
connections.Connect the two left lamp electric connections.Connect electric connections with front
harness.Take the car off the lifting bridge.