For precise identification of
the electrical connections, see Wiring Diagrams Section.
Refitting
(
Removing
)
Check that the wiring is undamaged
and that the individual conductors are firmly attached to the connections.Check that the connections are fitted with
anti-slip devices (secondary lock).If necessary, check the continuity.Refit the underfacia wiring harness.Secure the wiring harness using retaining
clips.Connect the earth ring.Connect the electrical connections to to
the various components.Connect the electrical connections to the
front and rear wiring.Refit the junction unit - CODE control
unit mount unit and do up the bolts. - 7040L40 front compartment scuff strip - r r
(right side)