3238620 - 7005N20 front side door lock motor/catch assembly - rr with door panel and support frame removed

Removing ( Refitting )  - 7005A04  front side door water guard protection - r r or replace with door panel removed - 7005C54  front side door internal opening return mechanism (with handle) - r r for repair or replace with different version - 7005D24  front door window rear guide - r r1. Disconnect, from the lock side, the linkage connecting to the outer handle.2. Undo the bolts.3. Move the lock over slightly.4. Disconnect the electrical connections (4a, 4b, 4c) then extract the loc,

NameConnector
4aFront door lock gear motor left  N50A 

NameConnector
4bFront door lock gear motor left  N50B 

NameConnector
4cFront door lock gear motor left  N50C 

NameConnector
4aRight front door lock geared motor  N51A 

NameConnector
4bRight front door lock geared motor  N51B 

NameConnector
4cRight front door lock geared motor  N51C 
Refitting ( Removing ) Check that the lock is intact and undamaged.Connect the electrical connections.Fit the catch.Tighten the bolts.Connect the connecting rods on the lock side with the outer handle.Check that the lock works by operating the outer handle. - 7005D24  front door window rear guide - r r - 7005C54  front side door internal opening return mechanism (with handle) - r r for repair or replace with different version - 7005A04  front side door water guard protection - r r or replace with door panel removedTest the operation of the lock by operating the inner handle.