Move the sun roof
to the closed position and open the curtain sunshade..1. Slacken the six bolts (1a) securing the sun roof window (1b).
1. Fit a 4 mm spacer (1a) between the rear of the glass panel and
the wall of the hatchway in the roof. 2. Tighten the rear right and left bolts (2c).3. Adjust the front right part (3a) of the window to 1 mm lower
than the roof's outer profile (as shown in the figure), then tighten
the front right bolt (2a). 4. Loosen the right and left bolts (2c).5. Adjust the rear right part (5a) of the window to 1 mm higher
than the roof's outer profile (as shown in the figure), then tighten
the right bolts (2c) and (2b). 6. rpeat points 3. and 5. for the left side of the window.
Check that the sun roof works
properly and slides into its various positions.
