3238804 - 7040A97 facia trim support beam - r r

Removing ( Refitting )  - 5010C12  Windscreen demising VENT - R.R. - 7040A37  fuse box cover - r r - 7040A44  facia lh side cover - r r - 7040G24  switch for facia compartment light - r+r - 7040G20  facia compartment light bulb holder - r+r - 7040A31  flap assembly - r r - 7040A09  passenger air bag compartment cover - r r - 7040A65  passenger compartment box lock , one , r r (left and right sides)  - 5040D22  control (one) of air conditioner control support - arrange - 7065C42  ashtray (one) r+r - 5570T80  car radio unit - r+r - 2125C24  gear lever knob - r + r - 7040A60  under facia trim - r+r - 3380A44  handbrake/linkage protection - r+r - 7040L28  tunnel switch panel - r r - 7040L20  tunnel trim - r r - 5560C51  combined analogue control panel - r+r or replace - 5540C18  headlamp/light cluster alignment correction motor switch - r+r - 5560C60  anomaly display - r+r - 5560B02  kilometre/mileometer - r r - 5560B03  rev counter - r r
Before working on the Air Bag system follow the safety instructions for working on the system carefully (  See assembly 5580C   air bag system ).
 - 5580C18  air bag module - r+r - 4110A11  steering wheel - r+r for replacement or check for versions with air bag - 7040A26  steering column trim - r+r - 5580C12  clock spring for air bag module on steering wheel r r - 5550A12  complete stalk unit - r+r for versions with air bag - 5580C22  AIR BAG MODULE - Passenger side - R.R. - 7040H30  front pillar trim - r r (left and right sides)  - 7040A10  instrument facia trim - r+r - 7040A05  facia/body bracket - fasten1. Undo the bolts fixing the electrical connections and fuses bracket.2. Move the bracket.3. Undo the bolts fixing the dashboard trim supporting crossmember.4. Remove the dashboard trim supporting crossmember after having disconnected it from the wiring.
Refitting ( Removing ) Check that the dashboard trim supporting crossmember is not damaged.Position the crossmember and connect the wiring.Tighten the bolts fixing the crossmember.

FasteningComponentØValue(daNm)
-NutFACIA TRIMMOUNT BEAMM60.85
Position the electrical connections and fuses bracket, then secure it using the bolts. - 7040A05  facia/body bracket - fasten - 7040A10  instrument facia trim - r+r - 7040H30  front pillar trim - r r (left and right sides)  - 5580C22  AIR BAG MODULE - Passenger side - R.R. - 5550A12  complete stalk unit - r+r for versions with air bag - 5580C12  clock spring for air bag module on steering wheel r r - 7040A26  steering column trim - r+r - 4110A11  steering wheel - r+r for replacement or check for versions with air bag - 5580C18  air bag module - r+r - 5560B03  rev counter - r r - 5560B02  kilometre/mileometer - r r - 5560C60  anomaly display - r+r - 5540C18  headlamp/light cluster alignment correction motor switch - r+r - 5560C51  combined analogue control panel - r+r or replace - 7040L20  tunnel trim - r r - 7040L28  tunnel switch panel - r r - 3380A44  handbrake/linkage protection - r+r - 7040A60  under facia trim - r+r - 2125C24  gear lever knob - r + r - 5570T80  car radio unit - r+r - 7065C42  ashtray (one) r+r - 5040D22  control (one) of air conditioner control support - arrange - 7040A65  passenger compartment box lock , one , r r (left and right sides)  - 7040A09  passenger air bag compartment cover - r r - 7040A31  flap assembly - r r - 7040G20  facia compartment light bulb holder - r+r - 7040G24  switch for facia compartment light - r+r - 7040A44  facia lh side cover - r r - 7040A37  fuse box cover - r r - 5010C12  Windscreen demising VENT - R.R.Check that the components involved are correctly fitted and working properly.