3239539 - Introduction - CLUTCH
CAUTION
CAUTION
All operations should be carried out taking great care to avoid
injury to persons.The engine compartment contains numerous moving parts, components
at high temperatures and electrical wiring with voltage.Follow these precautions scrupulously
when carrying out operations in the engine compartment:
- Switch off the engine and wait for it to cool down.
- Do not smoke.
- No naked flames.
- Make sure that there is a fire extinguisher in the vicinity.
For certain procedures, the use of Alfa Romeo special tools is
recommended. The use of these tools is vital in order to work safely.Follow the safety instructions in force for workshop procedures.
Where necessary, the Manual contains specific warnings to prevent
the risk of dangerous situations.For the use of chemical products, stick to the warnings on the
safety card which the supplier must give the consumer (in Italy
in accordance with D.M. No. 47/1992).The electronic ignition system generates voltages of 20,000 V
and higher which could be very dangerous to people, especially if
they suffer from a heart condition. Great care should be taken when
working on this system or near its components.WARNINGS
CAUTION
CAUTION
All operations should be carried out taking great care to avoid
injury to persons.The engine compartment contains numerous moving parts, components
at high temperatures and electrical wiring with voltage.Follow these precautions scrupulously
when carrying out operations in the engine compartment:
- Switch off the engine and wait for it to cool down.
- Do not smoke.
- No naked flames.
- Make sure that there is a fire extinguisher in the vicinity.
For certain procedures, the use of Alfa Romeo special tools is
recommended. The use of these tools is vital in order to work safely.Follow the safety instructions in force for workshop procedures.
Where necessary, the Manual contains specific warnings to prevent
the risk of dangerous situations.For the use of chemical products, stick to the warnings on the
safety card which the supplier must give the consumer (in Italy
in accordance with D.M. No. 47/1992).The electronic ignition system generates voltages of 20,000 V
and higher which could be very dangerous to people, especially if
they suffer from a heart condition. Great care should be taken when
working on this system or near its components.WARNINGS
All the operations must be carried out with the utmost attention
and care to avoid damage to the vehicle.prevent brake-clutch fluid coming into contact with painted parts;
If this should happen, wash immediately with water.Do not reuse brake-clutch fluid drained during bleeding.Before any interventions on electrical components, including
battery disconnection, make sure that the ignition is off ("STOP"
position).In order to release parts which are sticking, apply gentle blows
using an aluminium or lead hammer if iron materials are involved:
use a wooden or resin hammer for light alloy parts. During dismantling, check that parts which have to be marked
carry reference marks.When refitting, lubricate the parts, where necessary, to prevent
sticking or seizing during the initial operating period.Protect adequately with adhesive tape or clean rags those parts
of the engine which, remaining uncovered following dismantling,
offer entry passages to dust or foreign bodies.During refitting, it is essential to observe the tightening torques
and adjustment data.During each refitting, replace the gaskets, oil seals, spring washers,
safety plates, self-locking nuts, pre-treated bolts and all components
which have deteriorated.The replacement of removed assemblies or components should be
carried out using genuine spare parts only: this is the only way
that the interchangeability and perfect operation of the various
components can be guaranteed.