0510A20 TIMING GEAR WITH BELT DRIVE - CHECK - CARRY OUT OPERATION WITH CAM COVER(S) REMOVED AND TAPPETS ADJUSTED - Alfa - 156 - eLearn

1. Undo the bolt for the crankcase front cover shown in the diagram. 2. Fit the tool (2a) and secure it using the calibrated screw (2b)

	Name	Country
2a	Template	1.860.905.000

	Name	Country
2b	Calibrated screw	1.860.905.010

1. Remove the plug (1a) and fit the exhaust camshaft side template (1b) checking that it is correctly positioned.

	Name	Country
1b	Template	1.860.905.000

Only fit the exhaust camshaft side template because the inlet side one is not accessible.

Remove the timing tools.

	Name	Country
-	Gauge	1.870.986.900

Remove the exhaust camshaft template, as the inlet camshaft one has not been fitted.

	Name	Country
-	Template	1.860.905.000

	Name	Country
-	Calibrated screw	1.860.905.010

Tighten the bolt for the crankcase front cover previously removed. Tighten the plug in the camshaft housing for fitting the exhaust side timing tool.