3237446 - 1008A44 rear rigid mount - r r

Removing ( Refitting ) Position the vehicle on the ramp. Proceed with removal  - 7055B54  under-engine guard - r r . 1. Position a hydraulic jack under the gearbox.2. Undo the nut (2a) and the bolt (2b) and remove the power unit rigid rear support reinforcement (2c).
1. Undo the nut fixing the rear power unit rigid support to the flexible mounting.2. Undo the bolts (2a) and remove the power unit rear support (2b).
Refitting ( Removing ) 1. Refit the gearbox side power unit rear rigid support (1a) in its seating and tighten the bolts (1b) and (1c) to the specified torque.

FasteningComponentØValue(daNm)
1b----

FasteningComponentØValue(daNm)
1c----
2. Tighten the nut securing the rear power unit rigid support to the flexible mounting to the recommended torque.

FasteningComponentØValue(daNm)
2----
1. Refit the gearbox side power unit rear rigid support reinforcement (1a) in its seating and secure by tightening the bolts (1b) and (1c) to the specified torque.

FasteningComponentØValue(daNm)
1b----

FasteningComponentØValue(daNm)
1c----
2. Remove the hydraulic jack from under the gearbox.
Proceed with refitting  - 7055B54  under-engine guard - r r . Remove the car from the ramps.