1008A46 CAM SHAFT LEFT RIGID MOUNT - R R - Alfa - 156 - eLearn

3237447 - 1008A46 cam shaft left rigid mount - r r

) Position the vehicle on the ramp. Proceed with removal - 4450B04 right front wheel r r . Proceed with removal - 7055B54 under-engine guard - r r . Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with removal - 1092G10 single engine belt r r . Proceed with removal - 1092A10 Crankshaft services PULLEY - R.R. . Position a hydraulic jack under the engine.1. Undo the bolt securing timing side rigid engine support to the flexible mounting. 2. Undo the bolts (2a) and remove the timing side rigid engine support (2b).

Refitting ( Removing

) 1. Refit the timing side rigid engine support (1a) and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	ENGINE MOUNT TIMING SIDE	M10	(Crankcase side) 4.5 ÷ 5.5

2. Tighten the bolt securing timing side rigid engine support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	-	-	-	-

Remove the hydraulic jack from under the engine.

Proceed with refitting - 1092A10 Crankshaft services PULLEY - R.R. . Proceed with refitting - 1092G10 single engine belt r r . Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with refitting - 4450B04 right front wheel r r . Remove the car from the ramps.